 |  | 
 
The latest offering in the GDP pump line is the FUEL BOSS timed mechanical lift pump system! The FUEL BOSS is a belt driven mechanical lift pump that increase output and pressure to match engine RPM.
Common electronic failures of the factory lift pump are eliminated. No more worries of carrying a spare pump in the tool box. The stock lift pump will now only run for a few seconds at each start. After startup the stock unit is turned off via a Hobbs pressure switch and will not run again until the next start up cycle.
The FB-1000 pump supplied in the FUEL BOSS kit has no bearings to wear out and is a straight cut gear pump capable of pressures well above 100 psi. Running at a 2-1 reduction the FB-1000 turns only half of the engines RPM which is a mere 25% of its rated RPM at cruise. Extreme pump longevity is only one of the numerous benefits provided by the FUEL BOSS system!
All FUEL BOSS pumps come equipped with a 100% Viton lip seal. FB-1000 pumps are perfect for ULSD, Bio Diesel applications and Veg Oil conversions. Average seal life has shown to be 100k+ with proper belt tension.
Tied to the engine’s RPM via the crank mounted timing pulley the FUEL BOSS will increase output and pressure any time you increase engine RPM. This is a truly an engine timed high output system! Minimum fuel pressures at idle and maximum pressure at engine redline, just the way it should have been from the factory. Tap the throttle and watch your fuel pressure gauge rise instead of fall!
The FUEL BOSS can fuel any truck from a stock to the wildest, twin CP-3 fed power plant imaginable! For those of you who just can’t get enough fuel we also offer a Hyper-Drive belt and pulley combo which will increase pump speed and output an additional 20% over the stock 2 to 1 drive combo provided.
|
|
